Error Solution: “WiFi Says Saved but Doesn’t Connect”

With this guide I am going to try to help you solve one of the most common errors that happen when the WiFi says saved but does not connect and you cannot browse the network.

Has it ever happened to you that you try to connect to WiFi and see the message “WiFi says Saved but won’t connect ”? Don’t worry, you are not the only one since the same problem has happened to many of us.

There are several cases or situations in which our WiFi network or the network you are trying to connect to can cause problems, and one of them is this one we are talking about.

Many times it is enough to turn the router off and on to reconnect without problems. Other times it is enough to restart the mobile, and sometimes it is necessary to access the router settings.

Don’t worry, in this guide we are going to try to explain to you in a very simple way how to solve the error when the WiFi says saved but does not connect . Keep reading…

Content

WHY DOES WIFI APPEAR SAVED BUT NOT CONNECT?

On some occasions, connecting to your own or a family’s WiFi can cause a problem that we are not able to solve, no matter how many times you think about it.

In this case, it is common that when you try to connect to a WiFi network the “Obtaining IP address” message appears and does not disappear or that the WiFi symbol appears in gray and you see that the network is saved but does not connect .

The WiFi failure says saved but does not connect can be due to several factors, both the network you are trying to connect to and the device you use to connect.

When you save a Wi-Fi network on your device, you are storing its information so that you can automatically connect at other times without having to re-enter your access information.

However, sometimes, even though the network is “saved”, the connection may not complete so it is advisable to perform a check when this happens.

1. Incorrect Password:Make sure you enter the correct password. It’s easy to make a mistake or forget it, so check carefully.
2. Signal problems:Distance from the router and obstacles such as walls can weaken the Wi-Fi signal. The further away you are, the weaker the connection will be.
3. Incorrect Wi-Fi settings:Sometimes the network settings may be wrong. This may be due to recent changes or updates.
4. “Getting IP address” message:There may be no IP addresses available on the WiFi network you are trying to connect to.
5. WiFi connection symbol in Gray:In many cases you have to access the WiFi settings on your mobile to solve the problem.
6. Connection Disabled:In many cases you have to go to the network configuration to solve the problem.

These are the main problems that cause the WiFi to continue appearing but it does not connect , so we are going to try to solve them and check that you can connect without problems.

SOLVE WIFI SAYS SAVED BUT DOESN’T CONNECT

These are some of the checks that I recommend you carry out to solve the error when the WiFi says saved but does not connect message appears :

Password verification

1. How to find the correct password:Find the correct password on your router. It will likely be printed on a label on the bottom or side. If you have changed the password and do not remember it, you can reset the router and use the factory password again.

Improve WiFi signal

1. Router Location:Place the router in a central, elevated location. Avoid hiding it in a corner or behind objects, as this weakens the signal.
2. Removing obstacles:Make sure there are no large obstacles between your device and the router, such as walls or appliances, as they can interfere with the signal.
3. Updating router firmware:Access router settings through a web browser and check for pending updates. If there are any, install the available updates. This can improve connection stability and performance.

Correct Wi-Fi configuration

1. Make sure you select the correct network:Verify that you are trying to connect to the correct Wi-Fi network. Sometimes there are several available, and selecting the wrong one can be the cause of the problem.
2. Restart router and device:Restart both the router and the device you are trying to connect. This may resolve temporary issues and restore the connection.
3. Expand the IP Range: If the WiFi connection remains in “Obtaining IP address” it is possible that all the IPs assigned by the router are occupied because there are many devices connected. Disconnect some of them or go into the router configuration and within the WLAN settings increase the number of simultaneously connected devices or the DHCP range.
4. Change DNS:If the WiFi symbol is gray, you can try going into the network settings on your mobile and selecting Static IP, setting Clouflare or Google as DNS.

These simple checks may help you solve the problem of WiFi being saved but not connecting .

Updating software on devices

• Check if software updates are available for your device. Updates often include security improvements and bug fixes that can positively influence your Wi-Fi connection.

Apps to diagnose Wi-Fi problems

• You can use an app on your device to help you diagnose WiFi problems . These apps offer tools to analyze signal strength and detect interference.

CONCLUSION

In this guide I have explained to you what the main reasons may be behind the problem of WiFi being saved but not connecting .

Remember that it is very important to have a stable WiFi connection to carry out common tasks, such as working, studying and enjoying online content, so solving connection problems will improve the efficiency of your connection.

In summary, understanding the reasons why the “WiFi is saved but not connecting” message may appear and following some of the steps provided can help you solve Wi-Fi connection problems.